RAID Calculator — Usable Capacity, Fault Tolerance & Speed (RAID 0/1/5/6/10/50/60)
Kitni disk, kis size ki, kaunsa RAID — turant dekhiye usable space (TB aur TiB), kitni disk fail hone tak data safe hai, speed aur rebuild time. Hot spare, RAID 50/60 groups aur alag-alag size ki disks bhi support.
Your disks / Aapki disks
Capacity split / Space kahan gaya
- Array disks
- 4
- Parity / mirror
- 4 TB
- Rebuild time (min.)
- ~13.9 h
- 4 TB HDD par RAID 5 ka rebuild lamba chalta hai aur doosri disk fail hone ka risk badhta hai — RAID 6 ya RAID 10 safer hai. Large HDDs: prefer RAID 6/10.
- RAID backup nahi hai — alag backup (3-2-1) zaroor rakhein. RAID is not a backup.
12 TB usable chahiye? Hum poora server ready karke dete hain.
Refurbished Dell/HPE server ya ProStation tower — RAID controller, disks aur hot spare configured; Serverwale 72-point QC / ProStation 72-hour burn-in, 1-year warranty, GST invoice. Apna result WhatsApp par bhejiye.
How to use / Kaise use karein
- RAID level chuniye (0, 1, 5, 6, 10, 50 ya 60).
- Total disks daaliye (hot spare sahit) aur ek disk ka size (TB ya GB).
- Hot spare ho to unki ginti daaliye; RAID 50/60 mein groups (spans) set kariye.
- Alag size ki disks hain to 'Different disk sizes' tick karke har disk ka size likhiye.
- Result: usable TB/TiB, kitni disk failure safe, speed, IOPS aur rebuild time. Sahi setup ke liye WhatsApp par bhejiye.
Formula & assumptions
n = array disks (spares chhod kar), s = smallest disk size, g = groups.
- RAID 0:
n × s· RAID 1:s· RAID 10:n/2 × s - RAID 5:
(n − 1) × s· RAID 6:(n − 2) × s - RAID 50:
(n − g) × s· RAID 60:(n − 2g) × s - TiB = TB × 0.9095 · Hot spares add 0 usable space.
- Random write IOPS ≈
n × disk IOPS ÷ write penalty(RAID 1/10 = 2, RAID 5/50 = 4, RAID 6/60 = 6). - Rebuild time (minimum) ≈
disk size ÷ rebuild speed(HDD ~80–120 MB/s when idle; busy arrays take longer).
Speed figures are idealised; controller cache, stripe size and workload change real results.
FAQ
Q.How is RAID 5 usable capacity calculated?
RAID 5 usable capacity = (number of disks − 1) × size of the smallest disk. One disk's worth of space holds parity. Example: 4 × 4 TB in RAID 5 = 3 × 4 = 12 TB usable, and the array survives one disk failure.
Q.RAID 6 mein kitni space milti hai?
RAID 6 usable = (disks − 2) × disk size, kyunki do disk jitni jagah double parity mein jaati hai. 8 × 8 TB RAID 6 = 6 × 8 = 48 TB usable, aur 2 disk ek saath fail ho jaayein tab bhi data safe rehta hai.
Q.Does a hot spare add usable space?
No. A hot spare sits idle until a disk fails, then the controller rebuilds onto it automatically. It adds no capacity but cuts the time the array runs unprotected. The calculator counts spares in raw capacity only.
Q.Why does Windows show less space than the calculator?
Disk makers use decimal units (1 TB = 1,000,000,000,000 bytes) while Windows reports binary units (TiB, 1 TiB = 1,099,511,627,776 bytes). 1 TB = 0.909 TiB, so 12 TB usable shows as about 10.9 'TB' in Windows. The calculator shows both.
Q.RAID 5 or RAID 6 for large hard disks?
For hard disks of 4 TB and above, RAID 6 (or RAID 10) is safer. A RAID 5 rebuild on a large disk takes many hours, and if a second disk fails or hits an unreadable sector during the rebuild, the array is lost. RAID 6 survives two failures.
Q.RAID 10 vs RAID 5 — kaunsa tez hai?
Random writes mein RAID 10 tez hai: har write sirf 2 disk I/O leta hai (RAID 5 mein 4, RAID 6 mein 6 — isse 'write penalty' kehte hain). Database, Tally/ERP aur VMs ke liye RAID 10; file storage aur CCTV ke liye RAID 5/6 zyada space deta hai.
Q.Can I mix disks of different sizes in RAID?
Yes, but every disk is used only up to the size of the smallest disk. Four disks of 4, 4, 4 and 2 TB in RAID 5 give 3 × 2 = 6 TB usable and 6 TB is wasted. Tick 'Different disk sizes' in the calculator to see the waste.
Q.Is RAID a backup?
No. RAID protects against disk failure only. It does not protect against deletion, ransomware, fire or a failed controller. Keep a separate 3-2-1 backup: three copies, two types of media, one copy off-site.
Related guides & servers
More free calculators
- Server Electricity Calculator — watts, units/month, ₹ bill, old vs new
- CCTV Storage Calculator — TB needed, recording days, NVR/server
- Tally / Busy Server Sizing Calculator — RAM, CPU, SSD for Tally/Busy users
Updated 2026-11-17. Results are planning estimates — share them with us on WhatsApp and we'll check them against a real build.
